Información:

Bomba para el DPF correspondiente a vehículos y motorizaciones PSA. Incluye aditivo universal de alta eficacia (3RG REF: 88265) que reduce la formación de hollín y mejora la seguridad de funcionamiento de los filtros de partículas diésel (DPF).

Instructions for use:

•     1- DISASSEMBLE THE PUMP

Remove the tank protector to gain access to the tank and the white plastic support with tabs where the pump is housed. Lift the tabs and remove the white support. Unplug the pump and pull it gently to separate it from the white support.

•     2- INSTALL THE PUMP

Place the new pump on the white support, pressing as hard as possible so that it is well fixed without falling off by itself. Connect the electrical part of the pump to the white support and place it back on the tank, securing it with the tabs. Finally, cover the tank with the tank protector.

•     3- APPLY THE 4 IN 1 REGENERATOR

Fill the tank with regenerative liquid 4 in 1 (3RG REF: 88265) with the help of the filling kit (included).

•     4- CONNECT THE DIAGNOSTIC MACHINE

Finally, activate the “tank replacement” process for correct priming of the pump. At a certain point, the computer will ask you to wait for about 15 minutes, which is the time required to intermittently prime the pump. After that, the computer will indicate the completion of the process.